Riverside Machinery Marketing Crushing Buckets from LST Attachments

Riverside Machinery has unveiled a range of crusher buckets designed to work with any excavator available in the marketplace. There are three models – the CB160, CB260 and CB410.

Powered by the excavator’s standard hydraulic breaker circuit, the LST crusher bucket uses a fixed jaw and a hydraulically driven moving jaw. The gap between the two jaws can be set with shims to determine the size of the finished material.

The crushing action is achieved by the moving jaw being cycled in and out using an eccentric shaft. This shaft is equipped with flywheels at each end and rotated by a belt from the hydraulic motor.

The CB160 is designed to work with 8-14 metric ton excavators and has a capacity 0.5 cubic meters. The CB260 is designed to work with 18-25 metric ton excavators and has a capacity of 0.6 cubic meters. The CB410 is designed to work with 24-47 metric ton excavators and has a capacity of 0.9 cubic meters.

LST Crushing Buckets are manufactured wholly in Germany to a very high level of engineering offering you the customer robust performance and low running costs.

Riverside also reports that it is the U.K. dealer for the LST Group, a Germany-based manufacturer of demolition attachments, scrap shears, crushing buckets, screening buckets and hydraulic hammers.

For more information, contact Riverside Machinery at www.riverside-machinery.com.