Products

ATLAS COPCO MB750 HYDRAULIC BREAKER

Atlas Copco has unveiled the newest addition to its fleet of hydraulic breakers, the MB750. Features include:

Double retainer bar system
DustProtector II to help maximize the service life of the tool.
Powered by combination of oil and gas
Compatible with a broad spectrum of excavators
VibroSilenced system to reduce noise

Visit www.atlascopco.com for more information.

VERMEER HG8000TX HORIZONTAL GRINDER

Vermeer Corp. has expanded its line of grinders with the addition of the Vermeer HG8000TX horizontal grinder with a track undercarriage. Features include:

Tracked transportation providing extra traction for unstable ground conditions, access to remote areas or transport across shallow creeks or ditches
Equipped with 28-inch double- or triple-grouser track pads
Produces only 12 psi of pressure in soft ground conditions
Undercarriage with a rigid-mounted, reinforced boxed track frame
Powered by a 1050 horsepower engine
Millbox opening of 50 inches high by 71.5 inches wide
AutoFeed System, which stops and reverses material from feeding into the duplex drum when engine rpm drops below an efficient operating range
Can be controlled by a wireless remote control for a maximum operating distance of 300 feet

Visit www.vermeer.com for more information.

DOOSAN DX350 EXCAVATOR

The DX350 is the new model in Doosan Infracore America’s line of crawler excavators. Features include:

Replaces the current DX340 and is equipped with more horsepower, increased breakout force, and improved fuel efficiency, according to Doosan Infracore America
Has an operating weight of 77,600 pounds, an arm digging force of 39,460 pounds and a bucket digging force of 54,010 pounds
New polymer shims and bushings used at the boom, arm and bucket locations
A dual-walled muffler, centralized grease points on the boom and arm and convenient hose routing, wiring harness layout and filter placement

Visit www.infracore.com for more information.

IMPERIAL SYSTEMS DIVERTER VALVES FOR DUST CONTROL

Imperial Systems Inc., Jackson Center, Pa., is offering diverter valves to direct flow from a single source to multiple destinations. According to the company, the diverter valves can be used in a variety of applications including: recycling, scrap paper, woodworking, steel, mining, aggregate, biofuels and several others. Features include:

Three types of seals: rubber on metal, urethane on metal and metal on metal
Locking quadrant
Heavy-duty flange bearings
Bolt-on removable top and side access doors
Smooth interior with no rough edges
Other available options include manual, electric or pneumatic operation and stainless steel construction

Visit www.isystemsweb.com for more information.

JOHN DEERE CT315 TRACK LOADER

John Deere has added the small-frame CT315 to its compact track loader line. Features include:

Is Deere’s first radial-lift compact track loader with a 12.6-inch wide track and a narrow overall machine width of just more than 60 inches
Has a rated operating capacity of 1,500 pounds
Powered by a Deere PowerTech 4024T four-cylinder 2.4-liter engine
Equipped with a low-sloped rear hood that allows rear visibility
Belts are constructed of thick rubber, reinforced steel cords, imbedded steel drive lugs and large bending radii
All-steel carriage has roller and idler metal face seals and heavy-duty journal bearings

Visit www.johndeere.com for more information.

GUIDETTI CAESAR STONE CRUSHERS

Guidetti Recycling Systems, based in Italy, has introduced its Caesar 1 and Caesar 2 models of iron-tracked crushers. Features include:

• Weight of 14,740 pounds for Caesar 2 and 7,040 pounds for Caesar 1
• Production of up to 65 cubic yards per hour for Caesar 2 and up to 26 cubic yards per hour for Caesar 1
• Loading hopper with grizzly feeder
• Cooling radiator for hydraulic plant and engine
• Conveyor belt
• Fixed remote control with cable
• 35 kW powered engine at 2.5 rpm for Caesar 2 and 21 kW powered engine at 25 rpm for Caesar 1
• Can be utilized on sites with a lack of space
• Equipped with a radio remote control and tracks so only one operator is needed

Visit www.guidettisrl.com for more information.

Read Next

Built on Recycling

September 2009
Explore the September 2009 Issue

Check out more from this issue and find your next story to read.

No more results found.
No more results found.