Warren & Baerg introduces horizontal grinder

Model G2100-26-400 grinder allows customers to blend two types of materials at one time.

April 11, 2014
Waste Today Staff
Equipment & Products Wood/biomass

The Model G2100-26-400 grinder is the largest and the latest generation of Dinuba, Calif.-based Warren & Baerg’s high production, virtually dust-free square bale grinders. The G2100-26-400 Grinder model is designed specifically to feed two 4-foot by 4-foot by 8-foot bales side by side. This is so customers have the ability to blend two different types of material at the same time.

According to Warren & Baerg, many of its new customers are switching from a tub grinder or other multistage grind systems to its horizontal grinding systems to reduce or eliminate their dust problems, reduce horsepower, manpower, and maintenance cost as well as reduce material losses. The grinder can be either a high volume pregrinder or a one-step single grinder system down to one-eighth-inch screens.

The Warren & Baerg Grinding Systems consists of a bale feed conveyor with dust hood, grinder, screens, and either an air discharge chute or takeaway conveyor depending on customer specific needs and grind size. The bale feed systems are mechanically loaded or can also be semiautomatic to fit application needs. The grinder is electrically powered with two 200 horsepower motors and low horsepower or on certain lower tonnage applications, the grinder can be sized with lower horsepower motors. The conveyors have low horsepower motors, the company adds.

More information is available at www.warrenbaerg.com, by calling 559-591-6790559-591-6790 or emailing info@warrenbaerg.com.

A video of the Model G2100-26-400 operating is available by clicking here.